How is LED wall resolution calculated?

Divide the physical width and height in millimetres by the pixel pitch in millimetres. The final manufactured screen must use complete module and cabinet increments.

Does a smaller pixel pitch always make a better LED wall?

No. Pixel pitch should match viewing distance, content, screen size, environment, camera use and budget. A finer pitch adds resolution but may not be the best project choice.

Is the calculator result a final LED display specification?

No. It is an early planning estimate. Final dimensions, resolution, power, structure and control must be confirmed against the selected module and cabinet system.

NEXSHOWSStart an inquiry

FREE LED DISPLAY PLANNING TOOL

LED wall resolution calculator.

Enter the planned screen size and pixel pitch to estimate physical area, resolution and total pixels before selecting a cabinet system.

SCREEN WIDTH

metres

SCREEN HEIGHT

metres

PIXEL PITCH

millimetres

01Approx. resolution1,724 × 1,034 px

02Total pixels1.78 million

03Display area15 m²

04Physical aspect ratio1.67 : 1

Planning reference: a commonly used first-pass discussion point places the nearest comfortable viewing distance at roughly 2.9 metres for P2.9. Final resolution and dimensions must use complete module and cabinet increments.

HOW THE ESTIMATE WORKS

Turn physical dimensions into a useful first brief.

LED wall resolution is estimated by dividing each physical dimension in millimetres by the chosen pixel pitch. A 5 × 3 metre P2.9 wall, for example, produces an approximate pixel matrix before cabinet dimensions are applied.

The manufactured screen normally changes slightly so that its width and height use complete modules and cabinets. The calculator therefore supports early content and budget planning, not final engineering.

What should be confirmed next?

Application, indoor or outdoor environment, closest viewer, content format, camera use, service access, structural method and target delivery date.

Why can final resolution differ?

Every product uses a defined module and cabinet grid. Final dimensions need to land on complete physical increments, then the exact pixel matrix is calculated from that build.

What does NexShows need?

Send the country, application, approximate width and height, preferred pitch and delivery target. We will connect the estimate to a suitable product family.

TURN THE RESULT INTO A CONFIGURATION

Share the dimensions with NexShows.

The calculator gives an early reference. A product conversation confirms cabinet increments, final resolution and the complete project scope.

Start a project inquiry